How Much Does It Cost to Lift a Jeep?

It has become a common custom to lift Jeeps for new Jeep owners. Lifting the Jeep gives you a better view and adds other things that build up the Jeep. You might ask, how much does it cost to lift a jeep?

Well, The cost depends on the installer, the type of lift kit, and the brand. This article will let you know what you can look forward to if you want to lift your Jeep.

You can consider two options when you want to lift your Jeep, either you do the installation yourself or pay a professional to do the installation.

How Much Does It Cost to Lift a Jeep Using a Body Lift Kit

Lifting the body of the Jeep is around $200-$500. This is when you’re using the body lift kit, which is the most inexpensive jeep lifting choice. You can have in mind to spend up to $500 to $1000 for installation.

How Much Does It Cost to Lift a Jeep Using a Suspension Lift Kit

This is more expensive compared to the body lift. Unlike the body lift kit, the suspension raises the whole vehicle, its body, and frame. The cost of this kit is around $1000-$5000, plus $2500 for labor; this depends on the type of kit. At times, the vendor might charge extra fees for balance and alignment.

Also Read: Jeep Check Engine Light (Causes & Solutions)

Reasons for Lifting your Jeep

How Much Does It Cost to Lift a Jeep

Several people have one or more reasons they lift their Jeep. Here are some of the reasons:

  1. To increase the off-road performance
  2. Installing bigger tires
  3. Cosmetic purpose

One of the best vehicles for off-road is a Jeep. Nevertheless, the style and type of suspension lift you pick can improve the off-road performance. Increasing the height can increase the angle of approach, ground clearance, and articulation that helps you climb over big obstacles or extreme terrain.

Factors to Consider Before Lifting a Jeep

Whenever you are deciding on the type of lift kit for the Jeep, you should put into consideration the following:

  • The preferred tire size
  • Your budget
  • Jeep model
  • Your driving style

1. Your Preferred Tire Size

Normally, larger tires can’t fit into the lift kits. It’s affordable and easy to raise your Jeep so that larger tires can fit in. You won’t need a lift kit if you have to use a bigger tire. Unlike in light trucks and SUVs, there are various methods of fixing bigger tires into your Jeep.

2. Budget

You should still consider the amount you’ll have to spend. You could spend as low as $200 for a lift kit or as huge as thousands of dollars. It would help if you also thought about the tools you’ll want or need on the road. These includes:

  • Winch
  • Strong steering components
  • Strong axles
  • New larger tires and driveshafts.

Some people could afford up to $500-$1000, while some need more. Ensure that your budget and expectations match. Also, ensure that the modifications are carried out with mechanical performance and stability in mind.

3. Jeep Model

The body or suspension lift varies, and this depends on the model of Jeep you own. Unlike the body lift, the suspension lift could be expensive because of the number of components that’ll be replaced. You can decide to install the suspension lift to get the most out of your number.

4. Your Driving Style

You need to be certain about what you’re utilizing your Jeep for. Whether it’s going to be used for going and coming to work, or for the daily drive, or if it will just be for off-road. It can be any of these.

Also Read: Rod Bearing Replacement Cost

Types of Jeep Lift Kits

How Much Does It Cost to Lift a Jeep

Jeeps come with various accessories and parts, and hence, there are various options you can select from. This segment talks about some types of kit used for lifting you might contemplate for your vehicle.

1. Body Lift

One common way to lift your Jeep is by using a body lift. The modifications of the body lifts are where the spacers are positioned better for the body and chassis to lift the ride’s height. This is also a common method for fixing bigger tires in vehicles.

2. Budget Boost

This lift has coil spacers that are placed above the Jeep coil spring. The popular ones are the 1.5 to 2 inches. This type of lift is common since it does not need any modifications.

The quality of the factory ride also is maintained. Modifications such as the body lift are just for the exterior parts. Also, this is a good idea for drivers who wish to add bigger tires.

3. Coil Spring Lift Kit

If you need to improve its performance off-road, you should begin with this. Using coil spring Kits, you could lift your vehicle to 1.5-3.5 inches. You would also see a clearance for improvement in the articulation of your vehicle and larger tires. You might see other parts like the longer shocks and track bars in this skit. This enables it to fit perfectly.

4. Short Arm Lift Kit

You could alter the center of gravity and your vehicle’s suspension using these kits. It would give more suspension travel, bigger wheels, wheel travel, and more ground clearance. Hence, this kit would increase the off-road performance of your Jeep.

5. Long Arm Lift Kit

This kit is impressive and, at the same time, most difficult. The long arm gives extra 6.5 inches to your lift. And it involves a lot of labor and the possibility of new mounts and exhaust modification. Even though the long arm is more expensive, it gives a glossier driving understanding and better ground clearance.

Also Read: How Much Does a Dyno Tune Cost?

Pros of Lifting a Jeep

There are a lot of benefits to lifting your Jeep, most especially if the Jeep is for off-roading.

1. Bigger Tires and Wheels

You can do this using the suspension and body lifts.

As the distance between the fender and the axle center increases, it also gives space for a better tire option and a bigger wheel.

On the other hand, it raises the vehicle and also increases the Jeep’s grip in off-roading situations; compared to the stock wheel options, there’s more area that’s touching the ground.

2. Better Angle of Approach

The angle of approach is the highest ramp angle in which your vehicle can climb without interference from a horizontal surface.

The more the angle increases, the better the chances of climbing extreme inclines or higher obstacles, beginning from a plane surface.

In most situations, this can be obtained only with the suspension lift because you’ll have to increase the distance between the chassis and axles of your vehicle.

3. Good Break-Over Point

This angle could be where your rear and front axels can drive without the interference of the car beaching itself at the peak of the obstacle.

The more the angle increases, the more adequately your vehicle transverses while descending over the steep crest or going over the steep crest and twisting axles.

The only method that can improve this is a suspension lift since the distance between the chassis and the axles must be increased.

4. Better Angle of Departure

Unlike the approach angle, this is the highest angle of the ramp, whereby without interference, your Jeep could crawl down a plane surface.

When you’re descending off from it, the hill or obstacle gets steeper as the angle increases.

In most scenarios, you can obtain this only with a suspension lift to expand the distance that is between the chassis and the axles.

5. Deeper Water Wading

Once more, you can only use the suspension lift. As the engine intake is moved, so also the differentials, transfer case, and the transmission breathers increase.

This lifts your vehicle’s chassis from the ground, allowing you to safely wade through deep waters.

How Much Does It Cost to Lift a Jeep

Cons of Lifting a Jeep

As there are advantages to lifting a Jeep, so also there are disadvantages. These includes:

1. High Center of Mass

As the Jeep is raised, so also the weight. This can easily lead to rollover or tip-over when you perform evasive maneuvers or change your steering directions abruptly at speed.

2. Poor Fuel Economy

It can be very serious or quite insignificant, depending on how the modifications are done.

If this is just a small lift without higher tires fitted, it’s possible for you not to notice the high consumption of fuel. But if a 4-inch lift and a big 33-inch tire are installed, you will observe it.

3. Exiting and Entering the Jeep

Going in and out of your lifted Jeep can be a task for a normal person

Jeeps on their own already have a height that you’ll have to pull yourself inside, so raising the Jeep now would make it more hassle.

4. Additional Wear and Tear

Whenever you raise your Jeep, you are in essence, adding extra weight to the axles. With the installation of bigger tires, extra torque will be connected to the steering column and drivetrain, increasing the strain on your vehicle.

Most especially when you’re with off-road tires, the difference in weight ranges from a 27-inch tire to a 29-inch tire.

The extra grip the larger tires give makes it difficult for the power steerings to turn your wheels, and the differentials have to withstand the added grip and weight.

Also Read: How Much Does a Turbo Cost?

How Much Does It Cost to Lift a Jeep Wrangler YJ?

It costs between $200 & $1,200 to lift a Jeep Wrangler YJ. 

There are many options you can select from for lifting the YJ wrangler, from the normal body lift, where you can save yourself some money, to the suspension kit, which can be more expensive and elaborate.

How Much Does It Cost to Lift a Jeep Wrangler TJ

It costs between $100 & $1,300 to lift a Jeep Wrangler TJ. 

Similar to the YJ, there are many options for raising the TJ wrangler.

How Much Does It Cost to Lift a Jeep Wrangler JK?

It costs between $100 & $3,200 to lift a Jeep Wrangler TJ. 

The third wrangler generation has quite a wide span of options since it has been in the market for a long time, and it corresponds with the aftermarket car lifting trend.

How Much Does It Cost to Lift a Jeep Wrangler Jl?

It costs between $90 & $1,800 to lift a Jeep Wrangler JL. 

This model of jeep wrangler was introduced in 2018, which means it’s new to the market. So its aftermarket components used for lifting might be as huge as the last generation.

How to Measure the Height of the Lift on a Jeep

Whenever you want to lift a jeep, it’s vital to know how to measure the height of the lift. The height of the lift is the length between the axles and the chassis of the Jeep or the number in which the Jeep is lifted plus the normal height.

Lifting is expected for this kind of car because it is most often used for fun activities. Follow these guidelines to measure the height of your Jeep lift.

Step 1: Find the Location of the Vehicle’s Spring

The location of the spring depends on the model and make of your Jeep. The manual of your vehicle has a layout on how to find the spring.

Step 2: Measure the Vehicle’s Spring

Measure the full length starting from the spring base with a measurement tape.

Step 3: Find the Coil Spring Spacer

You should find it close to the spring. The model and the make of the Jeep would specify the location of the spacer. To recognize it faster, it’s shaped like a puck.

Step 4: Measure Your Coil Spring Spacer

Use a measuring tape to measure the coil spacer diameter.

Step 5: Calculate the Total Lift

To get the height of the lift, add together the diameter of your coil spacer with the length of the spring. The sum of the two gives the height of the lift.

That means you need to take some set of measurements for you to get the height of the Jeep. Remember to always have the manuals and a measuring tape at hand.

Does Raising Your Jeep Affect the Gas Mileage?

The additional weight on the vehicle harms the gas mileage. For you to know if lifting your vehicle is the right thing to do, here are some facts that could help you.

  • Some of the aspects that can affect your gas mileage include increased capacity, when the Jeep is greater than the standard of the manufacturer, and larger tires.
  • For a Jeep, the average MPG (miles per gallon) is around 22 cities and 29 highways.
  • A lifted Jeep wrangler might get at least 18 cities and 25 highways.
  • Different lift kits would also affect the gas mileage in different ways.

Also Read: What Is Muffler Delete (How Much Will It Cost)

Can You Put Bigger Tires on a Jeep Without a Lift?

It is common to use a jeep for off-roading, so the tires to start with are bigger than the average tire. Still, you might want to expand the size of your Jeep tire for aesthetic or functional reasons. Here are what you should know when it comes to increasing the size of your tire without lifting your Jeep.

  1. Check if the tires are extremely big for your Jeep, and watch the fender. The tire might rub against the fender, causing damage.
  2. One big impediment for Jeep owners wanting to go for larger tires is the stock rims.
  3. The opening at the back of the rim is a limitation, too, since it does not allow the installation of larger tires.

How Much Does It Cost to Lift a Jeep

Frequently Asked Questions – How Much Does It Cost to Lift a Jeep?

How much does it cost to get a lifted Jeep?

It depends on the type of kit used. The body lift kit is cheaper compared to the suspension lift. On average, a lift kit could cost around $1000-$10,000.

Is lifting a Jeep worth it?

Lifting your Jeep increases the off-road performance of your Jeep and dials it up, giving you extra power to withstand off-road landscape and extra crawling ability on the hardest landscape. So, lifting your Jeep will be a great choice if you want to increase the off-road performance.

Does lifting a Jeep make it unsafe?

Due to the extra weight, speeding at corners might be risky. The more the center of gravity, the higher the risk of rolling over. You’ll have to be careful if you are a person who likes to take corners with speed.

How long does it take to get a jeep lifted?

The time it takes depends on the type, the lift size, and the volume of work you need to do. In general, expect to spend up to three to four hours on perfect installation.

Does lifting a Jeep Wrangler void the warranty?

Exactly as it is with modifications, you have to remember that lifting your Jeep with some lift kits can revoke the warranty, so before installation, ensure to cross-check the lift kit with the warranty. The higher your lift, the higher your expense.

How high should I raise my Jeep?

On average, the lift kit would lift your Jeep between 1 and three inches. Nevertheless, some modifications and kits could raise your Jeep even higher. You’ll just have to spend more on modifications if you want to increase the height by more than three inches to give better stability and suspension.

Does lifting a Jeep lower gas mileage?

The miles per gallon would reduce slowly as you raise, add larger tires, armor, etc.

Conclusion – How Much Does It Cost to Lift a Jeep?

We have seen the amount it would cost you to get your Jeep lifted and also the facets that are involved in the procedure. Now, you can make your choice.

We recommend you contact a professional if you want to lift your Jeep and cannot do it yourself. These professionals can do the entire job and provide you with a proper quote.

But if you decide to save yourself some money by doing it yourself, ensure you take your time and follow the guidelines carefully.

We believe this write-up has helped you better understand how much it costs to lift a Jeep and what is involved in the process and has also given you some suggestions on what to do.

Leave a Comment