The 2014 Toyota Camry’s service light serves as a reminder for the driver to conduct regular oil changes. The maintenance indicator will keep blinking until you reset it if you forgot to do so during the last service or performed it yourself. In this article, I’ll guide you on how to reset it quickly and easily without any special tools.
This light illuminates based on the number of miles your vehicle has traveled and doesn’t signify a mechanical issue. Therefore, there’s no need for anxiety when it pops up on your dashboard.
Understanding the “Maintenance Required” Light
Before learning how to reset your Camry service light, it’s essential to familiarize yourself with the “MAINT REQD” icon on your dashboard. This light remains on until you carry out routine maintenance. Regular oil changes offer several benefits, including:
- Improved fuel economy
- Enhanced driving conditions
- Reduced wear and tear on vehicle components
- Avoidance of costly mechanical repairs due to engine blockages
Please note, turning off the service light doesn’t mean any damage to your vehicle. It can be a mere inconvenience if the light continues to flash after an oil change.
How to Reset the Maintenance Light on a Toyota Camry
Resetting the service light on a Toyota Camry is straightforward and quick, but timing is essential! Here are the step-by-step instructions:
- Insert your key into the ignition and turn it to the first position, just before starting the engine.
- Press and hold the odometer control on the dash and turn the key to the second position.
- Keep holding the odometer press when the service light begins to flash. There may be beeping sounds. Eventually, the light should go off.
- Release the odometer button and turn the key back.
- The process is complete if the indicator light stays off when you start your car. If the light comes back on, repeat the process.
Setting Up Maintenance
Even though the maintenance light is easy to turn off, remember to schedule your maintenance services! Your service light illuminates when you approach the 5,000-mile mark, and it’s time for a service appointment. Here’s a quick checklist of what to consider at this point:
- Oil replacement
- Filter changes
- Tire rotation
- Multi-point inspection and brake check
Depending on your vehicle’s make, model, driving habits, and other factors, our professionals can adjust your maintenance appointment accordingly.
How to Reset the Maintenance Light on Color-Displayed Toyota
If your car has a colored multi-information display, like the Corolla or Highlander models, follow these steps to reset your Toyota service light:
- Turn the key to “on” but do not start the engine.
- If your car has a button ignition, press the start button twice without touching the brakes.
- Using the multi-information display, select the cog icon.
- Select “Scheduled Maintenance” on the display.
Also read: Steering Wheel Makes Rubbing Noise When Turning (Causes & Solutions)
How to Turn Off Entune Touchscreen’s Maintenance Reminders?
Modern Toyota models provide maintenance alerts to inform you when to service or replace certain parts. After performing the recommended maintenance, you’ll need to manually turn off these notifications on your Entune touchscreen display:
- Press the MENU button on your Entune display.
- Using the touchscreen, select SETUP.
- Select VEHICLE.
- Choose MAINTENANCE.
- At the bottom of the display, tap RESET ALL.
Frequently Asked Questions
What does “maintenance required” mean on a 2014-2015 Camry?
The “MAINT REQD” symbol is significant. It indicates that the vehicle’s scheduled service is overdue. If your car is less than two years old, this service may be covered by your ToyotaCare plan.
How can I reset the maintenance light on my push-button-start Toyota Camry?
Press and hold the odometer button on your dashboard while turning the key to the second position. Continue holding the odometer button for an additional ten seconds. You’ll hear a beeping noise, and the maintenance light should start flashing and eventually go out.
How to reset the service indicator on a push-button Toyota Corolla?
To turn off the maintenance light: Turn the key to the “on” position without starting the car. If the Corolla has a push-button start, press the starter button twice without stepping on the brakes.
How do I remove the Toyota maintenance warning?
To reset the Service Indicator on a Toyota, turn your key to the first position before you start driving. Insert it into the ignition, press and hold the trip meter reset on the dashboard for ten seconds, and turn the key to the second position.
Does the “maintenance required” light imply a problem?
While the maintenance required indicator doesn’t necessarily indicate a problem with the vehicle, it should prompt you to schedule a service appointment with your technician or dealership.
Final Thoughts
The “MAINT REQD” indicator lights up within 5,000 miles of the last reset. It’s merely a mileage tracker designed to remind the owner that an oil change is due, and it doesn’t indicate any system malfunction. The recommended oil change interval isn’t always 5,000 miles. Refer to the owner’s manual and consult with your regular technician to find out how often the oil for your Camry needs changing.